Removing the Sceadu Evo 50 head assembly
| Author: | Rob Turnbull |
|---|---|
| Article Date: | 26th April 2007 |
First we need to remove the Jesus bolt holding the main gear onto the main shaft.
Remove the jesus bolt
With that removed, we can then detatch the links from the swash plate.
Detatch the links from the swashplate
Links detatched
Now the whole head assembly can be removed from the heli.
Notes
It's possible that the main shaft bearings can be worn a little, or otherwise not silky smooth to ease the passage of the main shaft through them, which will make life a little harder in removing the head. Gentle perseverence is advised. It sometimes helps to loosen off the bolts in the heli body around the main mast bearing housings.