Removing the Sceadu Evo 50 tail gearbox
| Author: | Rob Turnbull |
|---|---|
| Article Date: | 8th May 2007 |
First, remove the vertical fin by undoing the two fixing bolts.
Remove the two bolts holding the tail fin on
Now there are seven bolts holding the tail gearbox assembly onto the boom. Remove all of these being careful not to lose the nuts from the back of each bolt. Once the seven bolts have been undone, the casing can be split to reveal the inner workings and the belt.
Undo the seven bolts in the tailcase
The open tailcase
Notes
The tail gearbox housing on the tail rotor assembly side has a small plastic moulded protrusion on the inside front edge, which the tail boom locks into, and holds the tail gearbox assembly in the correct orientation when mounted to the heli.